|
Someone at the rally told me they installed one in that rear vent location and the wires were there. They had to tap into the wires going by but they were right there. I hope that's the same for ours since I bought a fantastic vent and intend to install it shortly after we return to our Montana.
I hear there's both 110v and 12v wires there so make sure you get the right ones. I hear the 110v are either shielded or are encased like romex in house wiring and the 12v wires are separate. I'll probably do as suggested and run a pin through each wire and check voltage with my volt meter.
|