|
Our monitor too is a little fiddly. I’ve tested the output of the cigarette lighter power supply and it’s good for voltage and flipped the wire a few times to make sure the plug at the either end isn’t intermittent. I also tried another power supply to make sure that wasn’t the cause.
For us, it appears to be the socket in back of the monitor. The monitor will go blank sometimes and I have to turn the 3.5 mm plug so that the wire is flipped up - meaning it bends the receiver in the monitor down a little. Thinking it’s a loose solder or wire joint in the monitor and just haven’t gotten around to fixing it. I also prob need to store it better as I usually put it in the center console with the plug in the monitor when not using it and that connection probably gets stressed.
|