Thread: RL3402 brakes
View Single Post
Old 09-17-2019, 11:15 PM   #2
rohrmann
Montana Master
 
rohrmann's Avatar
 
Join Date: Oct 2012
Location: Box Elder
Posts: 4,672
M.O.C. #12947
You will at least need new wheel seals, which are Dexter #010-036-00 or just #10-36. I tried to not use other brands of backing plate/brake assemblies. The Dexter assemblies are USA made and usually hold up quite well. If everything is good, maybe a pound of high quality grease, the four seals, rags and solvent to clean the bearings are all you should need. If you need new brake assemblies, you should be able to get them for a bit more than $100 per wheel. The assemblies come either RH or LH for the right or left side of the axle. I've used Redneck Trailer supply in the past. https://shop.redneck-trailer.com/p-3...ke-23-465.aspx
https://shop.redneck-trailer.com/p-3...ke-23-464.aspx
You don't say what year your rig is, but if it is new enough, you might be lucky to have the hydraulic leveling system which will make servicing your brakes and bearings much easier.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
rohrmann is offline   Reply With Quote