|
OK, simple fix........
If your ground clip is located on the top of the inlet(like mine was):
remove the 4 screws that hold the cover onto the camper
pull out the cover and some wire
notice on the back of the cover, the plug looks like a regular male headed cord
remove the 3 screws that hold the cord head from the cover
turn the cover to the right 1/3
put the 3 screws back in that hold the cord head onto the cover
put the 4 screws that hold the cover back onto the camper
your done....
I did check my wire screws to be sure the wires were secure, and they were. Also cleaned the cover before re-installing the 4 screws.
|