|
sreigle,
That could only be true for the bed slide if the rooms are out. Because it is mounted level with the floor upstairs of the coach. However, the other rooms that at the standard flush floor thru frame systems are at a downward slope as the rooms move out. That is as the rooms move out, they are rolling down hill. As they are coming in, they are being pulled up hill. So, if you have a bad seal on a cylinder piston in a cylinder and don't know it, typically the rooms won't move in from the out position. And if they are out, your not moving down the road anyway.
Usually when a room creeps out, it is from the in position. And it can happen when the coach is standing still or bouncing over the road. Most likely the later.
Be seeing you next week.
|