The dexter axle book says to torque 1/2 ubolts from 45-70#. 9/16 ubolts are 65-95#. Think you have half inch. There were lots of us that found ours not even torqued by keystone...which needs to occur at the end of assembly when the unit is compressing springs most. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|