Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

richfaa · 07-23-2015, 05:30 AM

we had a good set of LT tires on our 06 3400.They were Generals not made in China. The tire load rating was as I remember 3083 per tire or 6166 per 7K axle or 12,322 on both. Our pin weight was 2800 lbs. When weighed at a fall rally we were a bit over the load rating on the galley side. GVW was as I recall 15K and we were at the rally when weighed a bit over. We were right at the bitter edge of the tire rating but had the TMPS and drove at 62/65 MPH.we did not have a problem with those tires however with the 13 3402 Big sky with a higher GVW the G6 14s were a requirement.
Also on the 06 3400 we ditched the OEM suspension which included the axles for the Mor Ryde IS.

07-23-2015, 05:30 AM	#17
richfaa Montana Master Join Date: Jan 2005 Location: North Ridgeville Posts: 20,229 M.O.C. #2839	we had a good set of LT tires on our 06 3400.They were Generals not made in China. The tire load rating was as I remember 3083 per tire or 6166 per 7K axle or 12,322 on both. Our pin weight was 2800 lbs. When weighed at a fall rally we were a bit over the load rating on the galley side. GVW was as I recall 15K and we were at the rally when weighed a bit over. We were right at the bitter edge of the tire rating but had the TMPS and drove at 62/65 MPH.we did not have a problem with those tires however with the 13 3402 Big sky with a higher GVW the G6 14s were a requirement. Also on the 06 3400 we ditched the OEM suspension which included the axles for the Mor Ryde IS.