Quote:
quote:Originally posted by Jolu
I like to shoot new grease in the wet bolts about once per year. I have used general purpose grease and I have used the same hi temp bearing grease I used for repacking the bearings. Right or wrong using the hi temp bearing grease, that is what was handy while doing the bearings.
If you jack up that axle where the zert is not taking grease, it might relieve some of the pressure on the shackle link bolt and it will take grease.
You could also loosen the nut and crank that shackle bolt a quarter turn and it might take grease. Before you rotate the bolt try a new zert. That fixed one of mine.
Joe
|
Please note the spelling:
http://www.saeproducts.com/grease-fittings.html