|
I have the same problem, no binding going up or down but the front does not go over the mount like the rear one does. Mine has been like that since new and by measuring the top and bottom I found the parts mounted to the trailer sides were not the same distance apart.
It is next to impossible to move those mounts because they are only out about a 1/4 of an inch so you cannot re-drill the mounting holes and move it.
It is just another of the wonderful bits of workmanship displayed at the factory and was never caught by QC or the dealer.
I would suggest measuring and see if the bottom is the same distance apart as the top, bet it isn't.
|