Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

Montana_1302 · 10-01-2006, 07:44 AM

Thanks for all the replies. I should have stated the problem is with the street side bottle. It does have a regulator as does the curb side, each feeding into the transfer switch. If I'm reading everything correctly, the transfer switch "points" towards the tank it is drawing from and the indicator should be green and regardless of the switches position when it automatically switches over the indicator will go red. Then, when you check your system and see that it is red you switch over to the "full" tank and remove the "empty", refill and replace. That is how we started out and had the issues I originally posted. We took it to the dealer who replaced the street side regulator which did not fix the problem. At that point I started leaving the street side bottle off and move the bottle to the curb side when it goes dry. It's a pain but it is the only way I can get it to work. I will try the "open slowly" method and see if that changes anything.

10-01-2006, 07:44 AM	#12
Montana_1302 Established Member Join Date: Mar 2004 Location: Beaverton Posts: 28 M.O.C. #1302	Thanks for all the replies. I should have stated the problem is with the street side bottle. It does have a regulator as does the curb side, each feeding into the transfer switch. If I'm reading everything correctly, the transfer switch "points" towards the tank it is drawing from and the indicator should be green and regardless of the switches position when it automatically switches over the indicator will go red. Then, when you check your system and see that it is red you switch over to the "full" tank and remove the "empty", refill and replace. That is how we started out and had the issues I originally posted. We took it to the dealer who replaced the street side regulator which did not fix the problem. At that point I started leaving the street side bottle off and move the bottle to the curb side when it goes dry. It's a pain but it is the only way I can get it to work. I will try the "open slowly" method and see if that changes anything.