|
I bought rollers identical to the ones on the floor and mounted them to the bottom of the box so the box would run parallel to the floor. They are far enough back and offset a little so they don’t run into the floor mounted rollers when the slide is out. Picture is the foot of the bed box with the slide out where you can see the floor and box mounted rollers.
YMMV but I was concerned that the vinyl would get worn or grooved but it’s been ok so far. We sweep the floor before closing the slide. Another concern was I wondered if Keystone designed the box to pivot up/down on those floor rollers as the slide moved but no problems so far with that either. We also took stuff out of the box to keep the weight down.
Besides rollers or casters, I’ve read on this site that other members have used a block with carpet so that the fibers are against the floor. You might find that you don’t need anything.
|