Quote:
Originally Posted by Mark7
I drilled 2 - 1/4” holes in the plate and the plastic 180° apart, countersunk them and then used 1/4” countersink machine screws to hold mine in place screw heads are just under the surface of the plate. Been on for years now.
Another thing that might help is not lifting the trailer when hooking up, adding stress to that disk. I try to have the trailer just above (1/8”) the hitch when I latch up.
Works for me.
|
I've thought about the fastener idea too. Not a bad idea.
As for the hooking up, with the PullRite hitches, it's recommended that you actually raise the unit slightly when coupling. I've tried doing it without, and they are right, it doesn't work at all.
