Thread: Leveling blocks
View Single Post
Old 12-13-2020, 05:56 AM   #27
DebNJim B
Montana Master
 
DebNJim B's Avatar
 
Join Date: Jan 2018
Location: Northville, NY
Posts: 811
M.O.C. #21158
Quote:
Originally Posted by kowbra View Post
Thanks!

Just to make sure I understand; the jacks are now mounted 1 bolt width higher off the ground?
And, what was the reason you did that?

Brad
When we first got our with the level up it seemed the rear four jacks were low. This was born out when we entered our private site that has a dip in it and a rear jack bottomed out. I ended up raising the rear jacks two holes and the mid jacks one hole. I left the front alone as they had plenty of clearance. I use the Anderson blocks and get a very stable set up when level. I also carry four 11.5" square blocks 3" thick (2X12 sandwiched between two pieces of 3/4" exterior plywood) with handles that store nicely in a milk crate. I usually use two under the front jacks and just use the Anderson's in the back. I've yet to use all four wood blocks. Anderson's stack neatly and all fits in the front storage where the battery is.
__________________
Jim B
2017 Lariat F-350 FX4, CC, SB, 6.7 PSD 4WD
2018 MONTY 3731FL, at our private winter site in GA

DebNJim B is offline   Reply With Quote