[jetskier]

I ordered mine with the gen prep knowing I was going to transfer it from my old trailer. It appears the sheet metal box is fastened to the generator platform with #12 or #14 self tapping screws.

Hooking up the gas line and conduit wasn't fun. The clearance is tight. Don't bolt down the generator to the frame until you have the utility connections made. I remember lifting it up about 1.5" to have some hand room.


The orange romex has 5 conductors in it (10/4). Two hots, two neutrals and a ground. The Onan gensets are not 240V units. Each of the two 30A breakers are on the same phase. That requires two separate neutrals.