Quote:
Originally Posted by Renegade1LI
Ours has a 30 amp transfer switch with 10ga wire, if you want 50 amps you will have to install 6 GA wire. The wiring from the generator to the switch has to be 6 ga, as well as the wiring from the switch to the main breaker. Do not run 50 amps through 10 ga wire, make sure the installer changes everything to be rated 50 amp. The transfer switch is located behind the electrical panel if you want to check it.
|
10 GA is fine from the generator whether you have a 30A or 50A transfer switch.