The plastic BOND is what I meant to say and it is in tan as well as black .. I repaired two fenders and the stuff has not failed. Be sure to rough up the surface and if you have some alcohol wipe down after roughing it up..
There is a working time and then it sets up.. let it cure for 24 hours and re install fender if you removed to repair.
Chuck, could you please advise on which JB Weld to use to repair my fender skirt? You mentioned JB plastic weld but you also mentioned it was tan. The JB Plastic weld I found was translucent yellow and the tan one I found was called JB plastic bond. Not sure if the plastic weld or plastic bond is better. I already shaped a piece of plastic to use as a backer, just need advice on which JB weld to use. Thank you in advance, Bob