PDA

View Full Version : Settings


Razrbk
06-06-2017, 06:27 PM
Those of you have the TST 507's - are you using the factory default settings? Mine are on S637's. ------ Thanks

rohrmann
06-06-2017, 09:17 PM
I left the temperature setting alone, and set the low pressure alarm to 100 psi, and also left the high pressure to the factory setting. I try to maintain as close to 110 psi in my G614's.

DQDick
06-07-2017, 08:26 AM
We did the same. Because we are frequently where the temp can vary greatly in a day we set the low at 90 and left the high and the temp.

SRD
06-08-2017, 07:23 PM
X3.
I have 614's as well and run the same set up.

Razrbk
06-09-2017, 12:39 PM
Thanks for your responses.

vipermanden
06-09-2017, 12:47 PM
I have the Goodyear G614's and set the low alarm to 95 and the high at 135 psi. Since I am in higher altitude and colder weather, I found 100 to be too close to setting off the alarm since the pressure drops with altitude and temp. I use a base line of 60 degrees outside air temp for setting my 110 psi in my tires. I left the factory settings for temp alone.