Quote:
quote:Originally posted by Chiplynne
We have Dish at home and take the receiver when we travel. The carryout has worked great (I was frustrated with the manual process) and have been able to move it out of the trees when needed. I too have been unable to figure out the wiring to get it to the bedroom TV.
|
If you have a vip211k receiver it has a coax output (in addition to the HDMI) on the back of the box. If you can find any place in your wiring where the park cable coax comes in and you can insert a bidirectional splitter in that line, then you can connect a coax from the vip211k to that line via the splitter and it will get the sat signal into the regular park cable lines and get to the bedroom TV. Unless it is significantly different from mine. Another model may also work similarly if it has a extra coax output.
I did notice on the dishformyrv.com web site they now have a vip211z receiver. But it does not appear to have the coax output as the k did. It has a component output (in addition to the HDMI), which would be more difficult to connect to additional TVs.
Interesting about the Tailgater operation. I just had to take the cover off mine to see how it worked. (can't help it, I was an engineer in my former life
). When first turned on the dish rotated more or less a full circle then settled back to a generally southern direction. Then it began a series of "bumping" back and forth and up and down, I assume finding the exact location for the best signal for each satellite, before coming to a complete stop. So it really does not matter how you set it down initially, it will rotate and find the correct orientation.