|
Here is a paragraph in your manual that should help you out:
RECONNECTING THE UNIT TO A TOW VEHICLE
1. Be sure main power switch “ON.”
2. LCD display will indicate “READY: JACKS DOWN.”
3. Push “LEFT” and “RIGHT” buttons at the same time.
4. Unit will raise up to the point where the AUTO LEVEL was started, (normal starting point from
where it was disconnected from the tow vehicle.
5. Connect tow vehicle and make sure 5th wheel and pin are connected and locked.
6. Push “UP” arrow until” AUTO RETRACT” appears in LCD screen.
7. Push “ENTER.” System will immediately retract all jacks.
Good Luck....
|
Hybrid Mode
