Slide Stalling Question

[RMccord]

I have an 05 335RLBS that has recently started having the slide stalling issue. I went and bought the auto reset breaker in both 40 and 50 amp versions. I assembled a replacement set with 2 50amp breakers but when i went to my unit to install them I beleive I indentified the slide breaker and noticed that the nut on the terminal on the slide post side of the factory breaker was loose so I tightened it and it operated perfectly when I tried it again. I feel it was probably contributing to the problem. I did not replace the old breaker or do the fix other than tighten the nut. I will see if this is a permanent fix or temporary. So I will repost after some time with the current effort has some time.

Bob

[Okie Guy]

Bob,

Have you lubricated your slide gears? I was having this problem but as soon as I used some thetford slide lubrication the problem stopped. The creeking when I was operating the slides also stopped. It is fifteen bucks a can but well worth the money.

Phil

[RMccord]

Yep I have lubed them about 2 times a year.