|
12-30-2004, 05:32 AM
|
#1
|
Montana Master
Join Date: Feb 2004
Location: New Braunfels
Posts: 664
M.O.C. #920
|
SPST Switch stock mumber
Need some info, I plan on putting one of the Hunter thermostats in the Montana. Seems I recall a post that gave the stock number for the switch at Radio Shack. I know it is a SPST switch but I would like to have the stock number. Tried search without any luck.
Thanks in advance!
|
|
|
12-30-2004, 09:12 AM
|
#2
|
Montana Master
Join Date: Feb 2003
Location: Englewood
Posts: 3,095
M.O.C. #164
|
Thunderman, It is Radio Shack Part # 29-2004 Micro Mini Slide Sw.You can go to the Radio Shack Web Site and search by this part # and check stock at your local store.Hope this helps
|
|
|
01-02-2005, 11:38 AM
|
#3
|
Montana Master
Join Date: Feb 2004
Location: New Braunfels
Posts: 664
M.O.C. #920
|
Quote:
quote:Originally posted by kdeiss
Thunderman, It is Radio Shack Part # 29-2004 Micro Mini Slide Sw.You can go to the Radio Shack Web Site and search by this part # and check stock at your local store.Hope this helps
|
~~~~~~~~~~~~~~~~~Thanks Ken now I can finish the job.
* Sorry for posting in the wrong spot*
|
|
|
01-03-2005, 10:03 AM
|
#4
|
Montana Fan
Join Date: Apr 2004
Location: Syracuse
Posts: 286
M.O.C. #1424
|
WHat exactly does this switch do, controll the fan in a different way?
|
|
|
01-03-2005, 11:05 AM
|
#5
|
Montana Master
Join Date: Feb 2003
Location: Englewood
Posts: 3,095
M.O.C. #164
|
iT WILL GIVE YOUR (AC)HIGH AND LOW SPEED
|
|
|
01-03-2005, 11:13 AM
|
#6
|
Montana Master
Join Date: Dec 2003
Location: Chandler
Posts: 624
M.O.C. #740
|
Kozzy45 Ed,
When converting over to the Dig. thermostat, the one that a lot of us used made us decide where we we wanted to wire the fan permamently either on high or low speed.
Adding this switch allowed us to switch back and forth between high and low fan.
You can see this installation by going to "fulltimedreamer" under members, look for links to his homepage, then for improvements on the next page and then for Thermostat up-grade.
On mine I drilled a small hole just above the new Therm. installed the switch there. Looks like it came from the Factory that way.
Happy Camping
|
|
|
01-03-2005, 04:22 PM
|
#7
|
Montana Fan
Join Date: Apr 2004
Location: Syracuse
Posts: 286
M.O.C. #1424
|
So you changed to a Digital Thermostat and added a switcj to change the fan speed without pulling the chain?
That is awsome. I will check out Fulltimers info, but can you email me some more information on this, I would definatly like to look into this more, pictures too and model numbers, if you have it and it is not too much trouble.
Thanks
|
|
|
01-03-2005, 04:31 PM
|
#8
|
Montana Fan
Join Date: Apr 2004
Location: Syracuse
Posts: 286
M.O.C. #1424
|
OK, I get it, it is for the AC fan. and the switch you installed along with the digital therm allows you to switch between hi and low with the AC fan. Does the digital therm give a muc better control over the climate? Do you notice a big difference?
Also, I searched Radio Shack for the part number for that switch, but could not find it.
|
|
|
01-03-2005, 05:12 PM
|
#9
|
Montana Master
Join Date: Dec 2003
Location: Chandler
Posts: 624
M.O.C. #740
|
Ed,
I know the Dig. Therm. has a 1 deg. swing for turning the A/C or Heat on/off. The orig. may be more which gives less comfort. I think the biger advantage is you can set it by a number instead of a bar. It's easier to pick a number than trying to fish around to set the bar the same every time.
On fulltimedreamer's info. he has also put more installation instructions on an additional page that's accessed at the bottom left corner of the instruction page in case you have a little different style you'er dealing with. If you can print out his info. and have it right there when installing it quite simple.
I bought the Hunter Mod. 42995B from WalMart and Radio Shack has the switch hanging on the shelf. If the Switch number doesn't ring a bell for them, It's a mini SPST. You'll need to solder a couple of small wires just a few inch. in length on to the switch and install the switch just above the new Therms. outline. This is the hard part if you have fat fingers. It won't hurt if you open the hole behind the therm. a bit to help in the installation of the switch. After I was ready to mount the new Therm. for the last time I stuffed some foam rubber into the hole.
I you need more help just holler.
Isn't this a great forum?
|
|
|
01-03-2005, 11:20 PM
|
#10
|
Montana Fan
Join Date: Apr 2004
Location: Syracuse
Posts: 286
M.O.C. #1424
|
Sounds great, thanks for the info.
Has anyone seen a digital therm with the hi/lo built in?
This sounds like a great upgrade, I want to see if there is a switch like that out there, might save me from putting in the second switch. I know there are some RV manu. that have dig therms, so there might be a therm out there already.
Thanks again
|
|
|
01-04-2005, 11:23 AM
|
#11
|
Montana Master
Join Date: Feb 2003
Location: Englewood
Posts: 3,095
M.O.C. #164
|
The correct Radio Shack part No. is 275-406 Submini slide switch
|
|
|
01-04-2005, 04:25 PM
|
#12
|
Montana Fan
Join Date: Apr 2004
Location: Syracuse
Posts: 286
M.O.C. #1424
|
Thanks for the updated part number. I am in hte process of trying to track down a digital thermostat made for RV's that already has the hi/lo abbility. there has to be one out there someplace, has anyone ever heard of one?
|
|
|
01-08-2005, 02:45 PM
|
#13
|
Established Member
Join Date: Oct 2004
Location: union
Posts: 29
M.O.C. #2189
|
if you find that out, let us know.
thanks, jim
|
|
|
01-09-2005, 12:02 PM
|
#14
|
Seasoned Camper
Join Date: Jul 2003
Location: Holdenville
Posts: 50
M.O.C. #415
|
We had a motorhome that had what you are looking for so they are out there. It was a Dynasty by Monaco.
|
|
|
01-09-2005, 01:48 PM
|
#15
|
Montana Master
Join Date: Jan 2003
Location: Haldimand County
Posts: 2,413
M.O.C. #122
|
Radio Shack make both a slide switch and a toggle switch, either will work. I used the toggle becoause it was easier to mount on the thermostat case, you just have to drill one 1/4" hole. I used a White Rodgers thermostat, mostly because it was on sale at the time, but it has a little bit more room inside the case to install the switch and accomodate the wires, otherwise it works the same as the Hunter. (It does actually say in the instructions that it can be use on 12v mobile home systems).
So far as a thermostat that is actually designed for RV applications, there is now one made by Atwood that might work, but I can't tell for sure from the catalogue that I have whether it operates a two speed fan. (Atwood part no. 38555).
Later: Found it on the web and yes it does do 2-speed fan . Check the Atwood site: http://www.atwoodmobile.com/viewPDF....thermostat.pdf
|
|
|
01-09-2005, 02:45 PM
|
#16
|
Montana Master
Join Date: Aug 2004
Location: Livermore
Posts: 5,146
M.O.C. #1920
|
John -
Any idea on cost? I am having a new remote ordered for my '05 Montana. If the new one doesn't work, I might replace with a digital. Thanks for the information.
__________________
Ron and Terrie Ames - MOC #1920/KF0NTA
2021Montana 3230CK Super Solar Legacy Package
2021 Ram 3500 Laramie Longhorn, BIM Charging
4x4, SRW, LB, Crew Cab, Pullrite 3900 Hitch
|
|
|
01-09-2005, 03:13 PM
|
#17
|
Montana Fan
Join Date: Apr 2004
Location: Syracuse
Posts: 286
M.O.C. #1424
|
I found the Atwood in the catalog, if it is the same one, it was around $130, a little to much I think, I am still looking for others. I asked the Montana salesmen today at the show if he knew of one, and he said no, but he said Montana does now offer the remote control thermo.
|
|
|
01-10-2005, 01:25 AM
|
#18
|
Montana Master
Join Date: Nov 2002
Location: Weatherford
Posts: 1,383
M.O.C. #9
|
I used a toggle swith and mounted it in the wall right above the stat because it was easier.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|