Bedroom Seal

[daneboy]

My center seal on the bedroom slide out is 50% disconected. Does anyone have experience getting the seal back in place? It's an 06 2955rl.

[Mudchief]

I had that problem and I used a spatula to open up the rubber seal and another one to push it back down on the lip. It is not easy but you can do it. I then placed some screws into the bottom of the seal to prevent it from doing it again.

[DQDick]

Plastic putty knife will work also.

[daneboy]

Thanks for that, I was thinking a little mastick would help hold it in place but I like the idea of a few screws to hold it in place.
Happy New Year,
Jerry

[daneboy]

Problem solved. I followed Mudchief's suggestion and used screws to hold the seal in place. I used #8 1/2"self tapping screw with flat washers and placed one evry six inches.
Jerry

[Mudchief]

Glad you got it fixed.

[scductman]

Dennis which seal are you guys talking about? Is it on the outside or inside? I never had a problem with mine that I know of just want to know so I can ck. thanks
Bobby

[Mudchief]

Bobby, it is the one on the bottom of the bedroom slide outside. The factory is now putting screws in it.

[scductman]

Thanks I will ck it and see.
Bobby