There should be a label on the box that shows the positions of all connections and it should be easy to see where the room sensor comes into the 14x14 opening that the ac is positioned over and where it is installed. Freeze sensor can be seen stuck into the fins of the coil and should be easy to follow its lead down to where its plugged into. Good luck on your looking. it would not surprise me that the assembly line worker might plug in the wrong spot. And...a lot of people replacing the room sensor would just follow the wire and put the new one back where the old one was. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|