 |
10-14-2018, 08:17 AM
|
#1
|
|
Established Member
Join Date: Jul 2017
Location: CO Western Slope
Posts: 38
M.O.C. #20169
|
Progressive Industries EMS location
For those that have hardwired in a Progressive Industries 50 amp EMS, what location did you mount it? We are purchasing a 2018 3811MS and want to add the EMS right away.
Thanks for your help!
__________________
John & Lisa
2008 F450 | 6.4 PS | full delete | FASS system
2nd Montana - 2018 3811MS
|
|
|
|
10-14-2018, 09:45 AM
|
#2
|
|
Montana Fan
Join Date: Jun 2014
Location: On The Road
Posts: 245
M.O.C. #14438
|
Installed mine next to our power panel, so shore power and Gen. power goes through it before anything else.
__________________
Ron&Sue
2017 Montana 3720RL Legacy
14' Ram 3500 DRW
|
|
|
|
|
10-14-2018, 10:24 AM
|
#3
|
|
Montana Master
Join Date: Nov 2015
Location: Arlington
Posts: 1,032
M.O.C. #18081
|
Under the stairs accessed behind the rear wall of the basement. Lots of recepticle cable to make the splice and centrally located for our generator wiring convenience as well and out of the way. Placed the remote in the controls cabinet straight above the electrical panel. Very easy and straight forward install. A glow stick makes nice work to get through the existing chase behind the panel and closet (from the basement to the controls cab) in our rig.
__________________
2015 3440RL, legacy package, IS & Disc brakes, Sailun S637's, Onan Commercial Gen, 1200 Watts Solar, Midnight Solar Classic 150, Winston 700AH/8.4kwh LiFePO4, Winegard Trav'ler & Dish Hopper3, 2011 Ram 3500 CC Laramie DRW 4x4 4.10
|
|
|
|
10-14-2018, 07:51 PM
|
#4
|
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 1,347
M.O.C. #17894
|
Previous owners of my unit installed it on the basement wall, 2 feet or so inside the compartment door. He also installed a 2nd 50amp plug in, on the front of the camper for a genny hook up. There is a manual transfer switch box next to the unit to switch between the front and rear hook up.
The stock rear hook up goes through the EMS the front one does not.
From what I understand the EMS will NOT allow the genny power through it unless you fool it and connect the neutral and ground together in the cord.
My Ems is an older one that does not have the capability of a remote readout inside the camper.
__________________
2014 GMC 3500 Dually diesel 4x4 CCLB. Curt q24.
2011 Montana 3455 SA. 6 point level up. Disc brakes.
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS to be installed 6/2020
|
|
|
|
|
10-14-2018, 11:54 PM
|
#5
|
|
Montana Master
Join Date: Nov 2012
Location: Rancho Santa Margarita
Posts: 508
M.O.C. #13025
|
Instead of putting the neutral and ground together, you can buy a 15amp male plug from hardware store and take a short 12 gauge wire to jump from neutral to ground. Then put this plug into an available receptacle on the generator. I leave the plug in my generator so whenever I plug in my shore power cord the EMS will work as it should.
__________________
Russ and Linda, So. California
2004 Chevy Silverado 2500 HD, D/A, SRW, SB
2005 2955RL, Pullrite Superglide 16K hitch. Bridgestone Duravis R500 tires. EZ Flex Equilizers with wet bolts.EMS HW50C
|
|
|
|
|
10-15-2018, 11:21 AM
|
#6
|
|
Montana Master
Join Date: Nov 2015
Location: Arlington
Posts: 1,032
M.O.C. #18081
|
Quote:
Originally Posted by h2ojocky
Instead of putting the neutral and ground together, you can buy a 15amp male plug from hardware store and take a short 12 gauge wire to jump from neutral to ground. Then put this plug into an available receptacle on the generator. I leave the plug in my generator so whenever I plug in my shore power cord the EMS will work as it should.
|
Not a problem with the onboard gen sets.
|
|
|
|
|
10-15-2018, 07:50 PM
|
#7
|
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 1,347
M.O.C. #17894
|
h2ojocky, That's exactly what I stated, just done in a different way. Never thought of that though. I will have to try that.
__________________
2014 GMC 3500 Dually diesel 4x4 CCLB. Curt q24.
2011 Montana 3455 SA. 6 point level up. Disc brakes.
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS to be installed 6/2020
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
