|
01-19-2005, 05:17 AM
|
#1
|
New Member
Join Date: Jan 2005
Location: West Palm Beach
Posts: 4
M.O.C. #2914
|
bike rack
Folks: I'm new to this rving life. I'm buying a Montana3400rl and would like to mount my Thule bike rack to the back of this trailer. My bike rack fits a 2inch reciever. Is there an adapter kit that would attach to the frame of the trailer that would allow me to use my bike rack or do I have to have something custom made. How does doing this affect the warranty of the trailer espicially if welding is involved. Any suggestions greatly appreciated. jack
|
|
|
01-19-2005, 11:12 AM
|
#2
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
Jackswing, welcome aboard.
Doublecheck your manual for the warranty question. On our '03 model the frame warranty is voided by the addition of a hitch. You might call the frame mfr, Lippert, in Indiana, to see if they agree or will make an exception for you. There is some question whether bolting the receiver hitch to the frame rather than welding might be acceptable to Lippert.
Meanwhile, we used a ladder rack for two mountain bikes. They rode back there for 15k or more miles before we took them off and gave them to our kids. Since you already have a rack this might not be a welcome alternative for you.
|
|
|
01-19-2005, 11:30 AM
|
#3
|
Montana Fan
Join Date: Mar 2004
Location: Peabody
Posts: 135
M.O.C. #1268
|
Campers World had a bike rack that attaches to the rear ladder for under $50. Its good and solid and hangs off the rungs and holds two bikes.
|
|
|
01-19-2005, 11:31 AM
|
#4
|
Montana Master
Join Date: Nov 2003
Location: Monominto
Posts: 731
M.O.C. #657
|
Have a look at the improvements thread. This question was already asked and photos will be posted there.
|
|
|
01-19-2005, 02:53 PM
|
#5
|
Montana Master
Join Date: Aug 2004
Location: Livermore
Posts: 5,142
M.O.C. #1920
|
Jackswing -
I had a nasty experience with bikes on the back of a travel trailer. Almost lost the whole rig going into Sheridan, Wyoming. RV dealer there looked at our setup and said the bikes took enough weight off of the hitch that it just floated. To deal with it, we bought some mounts that the quick release hubs fit onto and screwed them into boards. I know the weight issue isn't a problem on the 5er, but I've read where a number of people put their bikes between the hitch and the cab. I plan on mounting the mounts on the floor there and locking them into the bed of the truck. Just another option.
__________________
Ron and Terrie Ames - MOC #1920/KF0NTA
2021Montana 3230CK Super Solar Legacy Package
2021 Ram 3500 Laramie Longhorn, BIM Charging
4x4, SRW, LB, Crew Cab, Pullrite 3900 Hitch
|
|
|
01-19-2005, 03:04 PM
|
#6
|
Montana Master
Join Date: May 2004
Location: Fort Wayne
Posts: 689
M.O.C. #1536
|
Last summer in our city campground which is a really nice one with water and electric and nice shower and laundry a guy was in there with a montana. He had a mount on the back of his trailer that had a small motorcycle mtd on it. I looked under it and it was a pretty beefed up frame extension. Still could not believe that is good on the frame. Never was anyone around to ask. Wish I had taken a picture. Hindsight better than foresight
|
|
|
01-20-2005, 08:13 AM
|
#7
|
New Member
Join Date: Jan 2005
Location: West Palm Beach
Posts: 4
M.O.C. #2914
|
Folks: sure appreciate your responses to my bike rack question. I'm sure Ill have many others as we get started rving. thanks-jack
|
|
|
01-20-2005, 09:31 AM
|
#8
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
One of our members built a hitch on his Montana for a bike rack. Go to this link and click on "bike or scooter rack" to see the pictures of how he did this.
http://www.picturetrail.com/ziggy101
|
|
|
01-20-2005, 09:51 AM
|
#9
|
Montana Master
Join Date: Jan 2003
Location: Ft. Smith
Posts: 981
M.O.C. #116
|
I just finished putting our MB's across the back of the bed, by the cab. Mine is on a 2 x 6 accross 2 of the blue 'milk' boxes, and I just turned Mary's bike upside down and put it up tight {almost touching} against mine. That put her handle bars on the bed floor out of the way and one side of mine over the top of the cab. Only took up about 18" of space and looks like the Montana will clear except for the tightest of turns. Hope it works.
Skip
We have an 8' bed.
|
|
|
01-20-2005, 01:17 PM
|
#10
|
Montana Master
Join Date: Aug 2004
Location: Livermore
Posts: 5,142
M.O.C. #1920
|
Skip -
You might want to look at the wheel mounts I bought at a Yakima dealer. They are a little unit that has an axle with quick release on it. Take the front wheel off and place on the axle mount, just like it was on a roof rack. Throw the front tire into the front of the basement or next to the bikes and you could run a cable lock through the frame and the hitch. I think the little mounts were about $20.
__________________
Ron and Terrie Ames - MOC #1920/KF0NTA
2021Montana 3230CK Super Solar Legacy Package
2021 Ram 3500 Laramie Longhorn, BIM Charging
4x4, SRW, LB, Crew Cab, Pullrite 3900 Hitch
|
|
|
01-20-2005, 03:18 PM
|
#11
|
Montana Master
Join Date: Jan 2003
Location: Ft. Smith
Posts: 981
M.O.C. #116
|
Rames14; I started to use a pair of those but decided it was a lot of trouble to ge the wheel assemblies off, messing with the brake stuff etc. They also used more room because of the handle bars. I wanted to be able to unload then ride without having to put something back together, also. Thanks for the suggestion tho.
Skip
|
|
|
01-22-2005, 03:40 AM
|
#12
|
Montana Master
Join Date: Nov 2002
Location: Eureka
Posts: 1,490
M.O.C. #2
|
Skip, we do what you do but use the Quick Release Mount as Ron mentioned. Works very good for us. We have a short bed though and the handle bars came too close to the nose of the camper. Caused a small amount of surface damage to the Front Cap. Our bikes mount facing in opposite directions but now we loosen the stem to turn the handle parallel with the bikes. We don't like that too much. Seems like we're asking for failure down the road with one of the bikes. Generally that's a fitting one never messes with. I will mention to Dick how you turn yours upside down. I don't know if that will work for us, but heck one never knows.
Great thread all. We too would really like a rear receiver put in. We already own a Reese receiver bike carrier and loved it. Haven't been able to use it since we got the Montana. The warranty thing scares us.
Patty
|
|
|
01-22-2005, 07:42 AM
|
#13
|
Montana Master
Join Date: Aug 2004
Location: Livermore
Posts: 5,142
M.O.C. #1920
|
Skip -
If (you might not have them) you have the quick release hubs, the brakes also have a lever either on the grip or down at the top of the brake to release the brakes and open them so you can get the wheel out. It takes just a few seconds to take my front wheel off and put it on the mount. If you have the quick release hub (there will be a lever on one side and a knurled knob on the other) but can't figure out how to release the brake, go to a bike shop and ask. There is only one type of quick release hub that I'm aware of but many different brake releases. When you put the wheel back on, the brakes will go right back where they are supposed to be.
__________________
Ron and Terrie Ames - MOC #1920/KF0NTA
2021Montana 3230CK Super Solar Legacy Package
2021 Ram 3500 Laramie Longhorn, BIM Charging
4x4, SRW, LB, Crew Cab, Pullrite 3900 Hitch
|
|
|
01-22-2005, 03:14 PM
|
#14
|
Montana Master
Join Date: Jan 2003
Location: Ft. Smith
Posts: 981
M.O.C. #116
|
Hi Patti; Hope y'all are feeling better. I talked to Dick about y'alls bike setup at the MOC rally, thats where I started thinking about that kind of set up.
RAMES14; I have the QD axles, I guess I didn't look at the way the brakes disconnected closely enough, that's the big reason I didn't want to go that route, that and having to turn the handlebars to get front cap clearance [learned from RC & Samantha's experience].
I took a ride with the bikes set up and they stood up to 65 mph, so I guess it works ok.
Skip
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Got a new bike rack
|
DQDick |
Additions & Improvements |
15 |
10-07-2014 09:48 AM |
Bike Rack on Pin Box
|
cdaniels |
Additions & Improvements |
2 |
07-14-2010 05:34 AM |
Bike Rack
|
Montana_657 |
Additions & Improvements |
0 |
01-20-2005 12:48 PM |
bike rack
|
Montana_557 |
General Discussions about our Montanas |
0 |
10-08-2004 03:38 AM |
Rear Bumper Scooter Rack & Bike Rack
|
Montana_120 |
Montana Problems, Problem Solving & Technical Help |
0 |
02-01-2003 03:58 PM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|