No fuss flush

[Montana_977]

OK, what's up now? Last week the black water flush was working fine, now nothing will come out of it! I have good water pressure to the hose, but nothing comes out of the hose inside the tank. Any suggestions? BobCherieStormy

[tweir]

I know there are several posts on this issue; but speaking from first-hand experience, our vacuum breaker failed along with some "debris" in the feed line. Replaced the vacuum breaker and blew out the line with LOW pressure and it works well at the present. I do know that from other posts on this site, the feed line hose actually came off---hence no water...!If your unit is under warranty, have the dealership fix the fault.

[DHenry]

Mine did the same thing, I removed the vacuum break from under the bathroom sink and pulled the lines down into the storage compartment. I then put an 1/2" PVC ball valve in line so I can manually operate the water flow to the black tank flush. It works great now.