|
03-24-2010, 09:52 AM
|
#1
|
Established Member
Join Date: Jul 2008
Location: Richmond
Posts: 48
M.O.C. #8671
|
Aluminum wheel corrosion
I have a 2009 3455SA. I have never had it on the road in any salt. It's a rare occurrence in Richmond, VA. When I picked up my unit in June last year, I noticed that the underside had more surface rust than I was used to. Well, it was built in Feb 09, and then towed from the plant to my dealer. What are the chances that the roads were salty in Feb from Indiana to Virginia..
I created my "end of warranty" list. Decals peeling in front, external cable TV hookup not working properly. And I notice that three out of four wheels are showing that the salt has worked it's way between the protective plastic coating on the aluminum wheels and the metal itself.
I was wondering if anyone else has had this problem, and if so, were you successful in having something done about it? It's at the dealer now. Their first call to me was "it's just dirt". Sorry, grew up in Vermont. Spent a good portion of my youth fixing the aluminum wheels on my Mustangs with the same problem.
The nest time I buy a trailer, I'll do it at a time that will minimize the chances of this happening again.
|
|
|
08-29-2010, 04:34 AM
|
#2
|
Montana Fan
Join Date: Dec 2005
Location: Grain valley
Posts: 356
M.O.C. #5098
|
I too have corrosion on my aluminum wheels. It should not make any difference if it has been in salt. I have had aluminum wheels on cars and trucks and never had corrosion. Has anyone had experience with Keystone or the wheel manufacturer doing anything about the bad China wheels? This should not happen at all let alone after only two years!
|
|
|
08-29-2010, 06:41 AM
|
#3
|
Montana Master
Join Date: Jun 2004
Location: Benson
Posts: 3,121
M.O.C. #1658
|
I have had aluminum wheels on cars, trucks and trailers and have had corrosion on all. Salt on the roads during the winter doesn't help. Even with no salt if you get a nick in the clearcoat water seems to start working its way under the clear coat, that's why I was happy our Silverado has a polished stainless cover on a steel wheel, holds up great, if you get a nick it's just a nick, doesn't turn into a big blemish. As for Greg's problem, they shouldn't look bad that soon
|
|
|
08-29-2010, 07:06 AM
|
#4
|
Montana Fan
Join Date: May 2006
Location: Nekoosa
Posts: 412
M.O.C. #5793
|
I too have corrosion on 2 wheels. My unit was built in May & went to dealer direct. I never drove in salt, leaving WI in Oct & returning in May.
But, we park almost on the Gulf...lot's of salt air.
Roy
|
|
|
08-29-2010, 08:37 AM
|
#5
|
Seasoned Camper
Join Date: Sep 2009
Location: Scotia
Posts: 88
M.O.C. #9683
|
I bought a left over `09 3400 and had the corrosion you mention. Dealer checked with Keystone and they replaced the entire wheel assemblies x4. Problem was the dealer reinstalled the wheels and must not had torqued them properly as I lost a wheel about 30 miles down the road! You can quess the amount of body damage done. If you get new rims/wheels insist and watch the dealer install the wheel exactly the way Keystone says to in the wheel video and check the torque as they recommend. Also check your tires if they are Goodyear Marathon`s made in China replace them. I just spent 4 days with rust converter/primer/paint on all the exposed areas on the frame I could get to. You would think if a dealer cared that they had to sell their unit once they recieved it, they would power wash the underside if it came in over the winter. I know I would.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|