Schematic of dump tanks and valves

[poloace]

Anyone know where you can get a schematic drawings of the undercarriage, which will show location of dump valves and tanks.
I asked Keystone and they responed, "it is not available for release". Really?
Would be helpful when fixing valves and cable valves.

[7.3Ford]

Richard,

This is bit dated, but I have some picture of the Factory Tour in 2011. I use them to help figure out how things are routed. The shower and black tank vales are pretty easy to get to, just un-bolt the under belly in front of the wheels where bottom level changes. The galley tank value and fresh water tank, your best bet is to cut a access hole.

Here is a link to my Factory Tour Pictures:

https://plus.google.com/photos/10904...ner=pwa&sort=1

[DQDick]

The reason Keystone won't release them, IMHO, is that they don't know for sure. Just like the electric all rigs are similar, but not the same. Just look at the number of responses when you ask what tank the washer drains into. Some go into grey 1, some grey 2 and some don't go into any tank at all.

[jcurtis934]

This is easily answered by putting a tarp on the ground under the monty and dropping the bottom. That way you know exactly what was done when yours was built and you can then clean out all the left-over crap that was in there, adequately support cable runs, and do anything you wish to do. John

[bigskyjimmy]

Yep that is what I did ,it is just a little time consuming but it is worth it and it is amazing(OR SLOPPY) what little use of zip ties they use for all the wires and cables so I took care of that while the underbelly was down

quote:Originally posted by jcurtis934

This is easily answered by putting a tarp on the ground under the monty and dropping the bottom. That way you know exactly what was done when yours was built and you can then clean out all the left-over crap that was in there, adequately support cable runs, and do anything you wish to do. John