Rear Hitch for Bikes

[leemedic]

I want a simple "Bolt into the frame" type of hitch (receiver) on the back on of my Monty so that I can insert a bike rack. I am talking drill holes into the rear lower frame with self taping bolts.

Does anyone know where I can get that type of hitch?

[Emmel]

Try a local hitch company. I had a business friend build mine, went with 2" for more stability.

[leemedic]

quote:Originally posted by Emmel

Try a local hitch company. I had a business friend build mine, went with 2" for more stability.

Wilco!

[bw2]

search on the web for "Hidden Hitch". I just installed one on my 2006 3400RL. It uses bolts vs self tapping screws. It is a 2 inch receiver. Hauled our bikes to Florida and thr rack was very stable.

[Jolu]

I think Hidden Hitch is the one you are asking about. I have one I have used on two different Montys.
You can check them out Here
Then check for best price on the web.
Joe

On Edit: You would want the Motorhome Hitch #82201. It fits from rail to rail. You probably want to measure your rails to verify. They should be about 72". The 82201 will bolt to the flange of the rail.

[Tom S.]

This is the best price I found on line that includes shipping:

http://www.hitchesonline.com/rv_hitch.htm

[bethandkevin]

You definitely do not want self tapping bolts. Only bolts and nuts for this job. I assume you do not have a hitch now. Find a good welding shop and have them build you one. Adjustable bolt together hitches allow too much play. Make sure it is made completely of 2" tube, anything less and you will be disappointed. Ours came with the 1-1/4" from Keystone. It failed on the first trip. My dealer switched out with a 2" version that is solid as a rock.

[leemedic]

quote:Originally posted by BethandKevin

You definitely do not want self tapping bolts. Only bolts and nuts for this job. I assume you do not have a hitch now. Find a good welding shop and have them build you one. Adjustable bolt together hitches allow too much play. Make sure it is made completely of 2" tube, anything less and you will be disappointed. Ours came with the 1-1/4" from Keystone. It failed on the first trip. My dealer switched out with a 2" version that is solid as a rock.

Good points. I think I will find a hitch shop.

[DougnDawn]

Check out the Blue Ox SC9000. Good luck and I hope you find what you need.

[Carl n Susan]

Don't let the "Adjustable bolt together hitches allow too much play" statement scare you off. The Hidden Hitch 82210 is a very sturdy hitch and eminently capable of carrying a couple of bicycles. I used one for 7 years on my previous Montana. There was no play in the hitch. I know three other members here who use the same hitch with the same results. The only thing not mentioned is the need for an extension in the 2" receiver. The end of the frame on the Montana is a fair distance from the end cap. Consequently the receiver hitch sits too far under the end cap for most bike racks.

A custom built and welded receiver hitch will be stronger than the Hidden Hitch model and suitable for carrying far more weight. It will also cost you more (assuming you can add the Hidden Hitch yourself). For anything other than bikes I would use a welded on hitch.

[Recumbent]

The OP wanted a more simple answer, but I believe the best answer may be more like the following: Recently had a Curt 2" RV speciality receiver hitch bolted and welded onto the bottom of the rear end of the 12 inch I-beams. I purchased a 14 inch extension to get the Hitch Rider Trike Rack out far enough to clear the back cap of the Monty. I ask the machinist at the welding shop (our neighbor and friend) how much weight he thought I could safely carry back there and he said to stop at 500 pounds. Also had outriggers welded onto the hitch under the I-beams for using chains and turnbuckles to stop any wobble in the bike/trike or a cargo rack.

[rohrmann]

Remember seeing a post by OZZ a while back showing a setup he made using two 2" receivers and having a real stable platform for storage of generators and such. If he's not too busy keeping everyone's heaters working, maybe he can post some pictures again.