mice, bed assy
Well, it finally happened to me. Got mices in the bottom...in the passthru area...and then up into under the bed via the two holes where the water and drain line for the washer/dryer and power run. Knew I should have sealed them earlier...bad johnny. So when I had the top of the bed platform off, I stuffed bronze wool into both holes and foamed the top as well as the underside of the holes in the passthru. That done and area clean...I find one of the bed platform rollers laying on the carpet with one short 8/32 wood screw. Really, just one screw and inadequate one at that?? Needless to say it is attached now with 1/4 inch diameter bolts and lock nuts. Traps set and waiting to see how many I get. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|