Replacement entry door

[KardRV]

Hi all. I just had my entry door replaced and got it home. I was going through the trailer and found that the ceiling light does not work. The entry door has an automatic lights on when the door opens and that doesn't work as well. Anyone know if there is a fuse to check for or do I need to call the dealer who put the door in and argue with them about it?? Any help is appreciated.

[CORattler]

It's the screen door on mine that has a plunger switch in the door casing. The person that replaced the door may have just switched off the affected light fixtures while he had the door open to prevent running down the battery. Try turning them on manually with the switch. SOMETIMES it's the simple things that escape us. Hope this helps!

[KardRV]

Thanks for the reply. I checked and all the lights were turned on. Called the dealer and was told to check for a fuse and found that the 15 amp fuse was blown. Replaced and back in business.

[Emmel]

Isn't it nice when some things are simple! Glad is was easy and you're back in business, so to speak!

[jackel1959]

KardRV,
For future reference, one thing you may have noticed is that there was a red light on above the blown fuse on the panel. This will tell you which fuse is bad. There needs to be a load on the circuit for the red light to illuminate though.

r,
Jack