Dual AC Thermostat Control Operation

[tim43]

Just had a bedroom AC put on my 2009 3585SA and need instructions on how to operate the unit using my heating and AC controller. It is one of the old control units. From what I understand, I do the following:
1. Select the ZONE button and press until "ZONE 1" blinks at the bottom of the screen.
2. Press the mode button until the system sets to cool. When that is done repeat the above process for ZONE 2 which is the bedroom AC.
Any further info will be greatly appreciated. Tim

[HOOK]

Tim, for more cool air in bedroom, there is a pair of finger tip levers in the face of the AC . Flip those to open for more air flow in bedroom.

[tim43]

Roger that Larry, but are the operating procedures for start up correct?

[Virginia Young]

Tim - The way you described is the way I set mine.

[cdaniels]

X2exactly how we do ours

[HOOK]

quote:Originally posted by tim43

Roger that Larry, but are the operating procedures for start up correct?

[HOOK]

quote:Originally posted by tim43

Roger that Larry, but are the operating procedures for start up correct?

You are correct.

[tim43]

Thanks all.

[Samiterry]

What I have found is, after power up of the Tstat, first thing is to set the time.