Bathroom Door Roller

[Castner's]

My wife and I have a 20173791RD Montana with the Swivel Door Roller. We have changed this roller a total of eight times now. I finally found a roller that will hold up and not strip the threads on the bolt. It is a three wheel roller. The thread does not move in the roller as there is a Teflon on the base of the threaded shaft that allows the door to swivel with no problem. You can obtain these roller through Lowes or order them from a dealer in Indiana. When taking the old roller base off the top of the door, use the same screws but you will need about a 1/4 inch spacer on top of the door or else you will not be able to slide the bolt into the base on top of the door. Put the new base for your roller in the exact same spot that the old roller was in. Slide the new roller into the shaft already there, take your toes of your foot and raise the door so you are able to slide the shaft into the base and then lock it. All set. We have had NO problems now since changing it.

[69Roadrunner]

Do you have a P/N?

[Butch & Kathy]

Please post a link to the roller that you used, any pictures would also be helpful. I had to fix mine on a cross country trip a couple years ago, drilled out the threads and installed a bot down from the top. Not ideal so I could use a better fix.

[AZ Traveler]

MorRyde will send one to you if you call their customer service. They only charge you for shipping. Easy install. There are previous posts on this subject.