|
|
11-15-2018, 08:02 AM
|
#1
|
Established Member
Join Date: Mar 2017
Location: Burney
Posts: 35
M.O.C. #19517
|
Transmission temp gauge
On my 2017 Ram, with the 6.7 and six speed transmission. The transmission temp gauge in the dash runs at the half way mark on the temp gauge. Whether I am towing or just motoring down the road. When towing on a steep grade the motor temp gauge move to the warmer side but no matter what we are doing the temp stays at the middle. Anyone else have this experience?
|
|
|
11-15-2018, 09:25 AM
|
#2
|
Montana Master
Join Date: Oct 2017
Location: Trinidad, TX
Posts: 506
M.O.C. #20746
|
What model do you have?
__________________
2018 Ram 3500 Laramie Longhorn 4X4 Dually Cummins Aisin CC LB / B&W Companion hitch
50 Gallon Transfer Flow in bed tank w/ Trax 3
2018 Montana 3121RL
|
|
|
11-15-2018, 09:43 AM
|
#3
|
Established Member
Join Date: Mar 2017
Location: Burney
Posts: 35
M.O.C. #19517
|
Sorry, I thought all models would have the same gauges. I have the Longhorn model.
|
|
|
11-15-2018, 10:38 AM
|
#4
|
Montana Fan
Join Date: Sep 2016
Location: Omaha
Posts: 104
M.O.C. #19003
|
Quote:
Originally Posted by Mtnquail
On my 2017 Ram, with the 6.7 and six speed transmission. The transmission temp gauge in the dash runs at the half way mark on the temp gauge. Whether I am towing or just motoring down the road. When towing on a steep grade the motor temp gauge move to the warmer side but no matter what we are doing the temp stays at the middle. Anyone else have this experience?
|
My Chevy dually does the same thing, I've read or been told the xmission is designed to run at a certain temp to burn off any condensation in the xmission oil and within itself. My temps run around 210 degrees under no load.
|
|
|
11-15-2018, 12:45 PM
|
#5
|
Montana Master
Join Date: Oct 2017
Location: Trinidad, TX
Posts: 506
M.O.C. #20746
|
The temps on my DIC digital readout for both the tranny and engine fluctuate based on usage. Both are within the norms.
__________________
2018 Ram 3500 Laramie Longhorn 4X4 Dually Cummins Aisin CC LB / B&W Companion hitch
50 Gallon Transfer Flow in bed tank w/ Trax 3
2018 Montana 3121RL
|
|
|
11-15-2018, 12:50 PM
|
#6
|
Established Member
Join Date: Mar 2017
Location: Burney
Posts: 35
M.O.C. #19517
|
My ram dealer said the same. But it seems to me that when pulling a 10k plus rv over the sierras or siskiyous you should normally see a change in the pointer. It goes to the mid position and stays there. I am maybe overly concerned the sending unit or gauge sticks, and not showing the increase in temp.
|
|
|
11-15-2018, 01:26 PM
|
#7
|
Montana Master
Join Date: Oct 2004
Location: Salem
Posts: 7,553
M.O.C. #2283
|
This goes for Ford, Ram, and Chevy. They are Id 10 T gages. They aren’t real gages they are idiot gages. They are programmed to not move very much and will only show hot when your transmission is almost or is to hot. They are programmed that way so people won’t go back to their dealer because they think their transmission is about to get to hot. You can get real gages that will show the correct temperatures either analog or digital.
Lynwood
|
|
|
11-15-2018, 02:03 PM
|
#8
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,371
M.O.C. #4831
|
I would be very surprised to learn my digital temperature gauges on my 2015 (and newer) Ford are lying to me. They definitely change a lot when towing.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
11-15-2018, 02:16 PM
|
#9
|
Established Member
Join Date: Mar 2017
Location: Burney
Posts: 35
M.O.C. #19517
|
That is what bothers me. The boost gauge changes, engine temp changes. Depending upon load I expect my gauges to reflect how hard the truck is working to keep me from harming some part of it. Having worked in powerhouses for 30 plus years, gauges and indicators are important. I watch them and try to interpret the information they provide. So if anyone has a 2017 with the transmission temp gauge above the turbo boost gauge , I would enjoy hearing from you and what you have observed. Thanks in advance and this is a wonderful forum for gathering information.
|
|
|
11-15-2018, 02:37 PM
|
#10
|
Site Team
Join Date: Aug 2007
Location: Omaha
Posts: 6,750
M.O.C. #7560
|
If nothing else contact Dodge Truck Customer Service and ask them if this is normal. A lot of times the dealers service reps don't really know what is going on and only the diesel mechanic/s for the dealer really knows what is normal and what is not. This is why I go past the service reps when I have a problem with my truck and go right to the diesel mechanics at the dealer. I always ask a service rep to take me out to the mechanic so they also know what to say if someone else asks a similar question on their unit. So I guess besides the mechanics here on the Forum you have two other choices- Dodge Customer Service or the actual mechanics that work on your unit at the dealership. Good luck and let us know what you find out.
|
|
|
11-15-2018, 04:25 PM
|
#11
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,320
M.O.C. #17894
|
On my 14 GMC the dash gauge reacts very slowly and you really can not get an accurate temp. However if you scroll though the dic you can bring up a digital temp with real time #s.
I also have a Mini max that displays trans temp as well. The 2 almost always are with in 1 degree.
Normal temp, who knows. Is it 95 out or 20. Are you towing or not ?
I have seen temps as high as 225 while pulling up a long grade.
__________________
2018 Chevy 3500 LTZ Dually Diesel 4x4 CCLB
2011 Montana 3455 SA. 6 point level up. Disc brakes. Curt Q24 Hitch. 5 step glow steps
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS
|
|
|
11-15-2018, 06:37 PM
|
#12
|
Montana Master
Join Date: Nov 2009
Location: Wampum
Posts: 571
M.O.C. #9928
|
Mlh hit the nail on the head. On my '08 F350 the tranny temp gauge never moved. I added an after market gauge and watch the temp go up and down as conditions changed. The stock needle never moved.
Personally I strongly recommend a REAL gauge for tranny, oil pressure/temp, and anything else you want to monitor.
__________________
"What happens at camp stays at camp"
2018 3121RL
2016 Ford F350 SB SRW
|
|
|
11-15-2018, 08:15 PM
|
#13
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
Quote:
Originally Posted by Mtnquail
On my 2017 Ram, with the 6.7 and six speed transmission. The transmission temp gauge in the dash runs at the half way mark on the temp gauge. Whether I am towing or just motoring down the road. When towing on a steep grade the motor temp gauge move to the warmer side but no matter what we are doing the temp stays at the middle. Anyone else have this experience?
|
My truck is similar. You should be able to scroll through various gauges from the buttons on the left side of the steering wheel. One of which will be a trans temp gauge that reads in degrees, not a scale. My temp stays fairly stable unless we are moving slow and steep preventing airflow through the cooler. Rams have very good cooling capability so temps don't fluctuate much. My Ford and Chevy required extra coolers to get the results the Ram gets.
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|
|
|
11-18-2018, 08:25 PM
|
#14
|
Montana Master
Join Date: Sep 2017
Location: Willis
Posts: 896
M.O.C. #20587
|
Quote:
Originally Posted by carl n susan
I would be very surprised to learn my digital temperature gauges on my 2015 (and newer) Ford are lying to me. They definitely change a lot when towing.
|
Same here. Mine always run east and west of mid points as towing load and elevations change.
__________________
2018 Montana 3791RD (SOLD)
2017 Ram 3500 DRW 6.7 Cummins Aisin, B&W RVK3600 (SOLD)
|
|
|
11-18-2018, 08:33 PM
|
#15
|
Montana Fan
Join Date: Oct 2004
Location: Jonesborough
Posts: 235
M.O.C. #2313
|
Quote:
Originally Posted by mlh
This goes for Ford, Ram, and Chevy. They are Id 10 T gages. They aren’t real gages they are idiot gages. They are programmed to not move very much and will only show hot when your transmission is almost or is to hot. They are programmed that way so people won’t go back to their dealer because they think their transmission is about to get to hot. You can get real gages that will show the correct temperatures either analog or digital.
Lynwood
|
Not true on my 2017 Ford. The tranny gage will move as the temp goes up. Once it gets to 218 degrees the temp will show up above the gage.
|
|
|
11-18-2018, 08:51 PM
|
#16
|
Established Member
Join Date: Mar 2017
Location: Burney
Posts: 35
M.O.C. #19517
|
I swapped positions of my turbo and transmission temps gauges. Nothing about the readings changed. Both are similar to bar graphs but as I scrolled thru all the possibilies I did not find a read out that gave me degrees for the transmission temp. Maybe the question to ask is does anyone know what the sending unit looks like and how it works? Is it the type of sending unit I could put in water and heat the water to show an increase of temp at the gauge? Or other suggestions?
|
|
|
11-18-2018, 08:57 PM
|
#17
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
I have a 2017 and can also scroll thru and get an actual temerature readout.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
11-18-2018, 10:52 PM
|
#18
|
Site Team
Join Date: Apr 2017
Location: Colorado Rockies
Posts: 1,923
M.O.C. #19755
|
If you don't have a fancy display, you can get one of these for $11
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
Then get the Torque Pro app on your phone or tablet for about $4
You will be able to see a ton of information, scan for codes, and reset codes. I installed custom PID's (downloaded for free) that give a lot of extra info for the Ford 6.7; probably also available for GM & Dodge.
The app saved my bacon when I was stuck on the side of the road with a fuel filter problem.
__________________
Scott & Alta
2017 Montana 3160RL, Legacy, Onan 5.5Kw, Solar
2022 F-450 Lariat Ultimate
|
|
|
11-19-2018, 09:03 AM
|
#19
|
Montana Master
Join Date: Oct 2004
Location: Salem
Posts: 7,553
M.O.C. #2283
|
Quote:
Originally Posted by scottz
If you don't have a fancy display, you can get one of these for $11
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
Then get the Torque Pro app on your phone or tablet for about $4
You will be able to see a ton of information, scan for codes, and reset codes. I installed custom PID's (downloaded for free) that give a lot of extra info for the Ford 6.7; probably also available for GM & Dodge.
The app saved my bacon when I was stuck on the side of the road with a fuel filter problem.
|
I have one. Mine isn’t the exact brand but it does the same thing. If you get one just make sure it will work with your IPhone if you have an iPhone, some will some will not. If I remember correctly the IPhone will not hook up to these in Bluetooth for reasons that were above my pay grade. You will need one that transmits in WIFI.
Lynwood
|
|
|
11-19-2018, 06:49 PM
|
#20
|
Montana Master
Join Date: Sep 2010
Location: North East
Posts: 1,050
M.O.C. #10758
|
As stated above, go thru the menu and see exactly what your trans temp is.
I have the Asian trans and it doesn't fluctuate but a few degrees if any.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|