Magic Chef Piezo Ignitor Montana 3295RK

[Schmill]

We have a Montana 3295RK with the Magic Chef range. Apparantly, the Piezo ignitor has "bit the dust". The owner's manual has no reference to a replacement ignitor or how to install. Can anyone out there provide any information on the part and/or replacement of it.

Thanks a lot for your help,

Jacob Schmill

[Ozz]

Jacob, you might check the gap on it and see if it is grounded. other than that, look for a model and serial number, and try Googleing it.

[Karl]

The link below MIGHT be the part you need, but be sure to check further. I have ordered other parts from this company.

http://www.repairclinic.com/SmartSea...4015&PPStack=1

Hope this helps.

[dieselguy]

Is it the ignitor itself or simply the knob? The knob on my stove fell apart inside and wouldn't work the "sparker". A local RV dealer stocked the knob. Old one slides off ... new one slides on.

[bsmeaton]

Jacob,

Magic Chef is Maytag. If you go through Maytag and use the oven model number the parts schematic and info should pop up.