|
Nice job Wayne! I took one of the wire closet racks you can buy at Lowes, Home Depot or the like and cut it down to the width of the basement, turned it upside down with the hanger edge up, then used the small plastic clips you secure them to the wall with in a stick and put two short screws into the carpet and wood flooring. Used about four clips on each of the two openings. With our 2930 there is a small 2" edge on each side also to the shelving rests on it and not problems. Don't even need any center supports-- at least not yet anyway. Space underneath used to store some of the smaller items used. Wish I had a picture of them but I don't. I'll try and get on and post it when we get back from Georgia and Alabama!
|
Hybrid Mode
