Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > GENERAL DISCUSSIONS > General Discussions about our Montanas
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 01-14-2013, 02:51 PM   #1
portliz
New Member
 
Join Date: Jan 2013
Location: London
Posts: 2
M.O.C. #13126
Montana High Country

The other day we were looking at the Montana High Country. We would like some feedback re slide mechanisms and overall quality. We also have a Sierra 2500 Diesel and think we might be over on the towing capacity. We would be interested in hearing from owners.
portliz is offline   Reply With Quote
Old 01-14-2013, 03:56 PM   #2
BusyCarol
Montana Master
 
Join Date: Jul 2012
Location: Billings
Posts: 698
M.O.C. #12641
We almost bought a Montana High Country. I called Keystone and asked several questions. There customer service department told me that the next year model of the Montana (NOT High Country) would have the same slide mechanism but only in the bedroom. He said it was a huge weight savings and they had not had 'that many' issues with them. He said you just had to watch the cable. We ended up going with a Montana for two reasons, the floor plan, and we felt that it was little higher quality. We ended up getting the Montana for only a $1000 more than what we would have paid for the High Country. I just kept wheeling and dealing them down. Good luck making your choice! I don't have any personal experience though.
BusyCarol is offline   Reply With Quote
Old 01-14-2013, 04:11 PM   #3
michael346LBQ
Seasoned Camper
 
Join Date: Jan 2013
Location: Eagle
Posts: 52
M.O.C. #13110
I pull a 2012 38 ft 5in montanna mountaineer with a f250 srw V10 gas engine crew cab no problume. I know you have plenty of motor to do it with the duramax.
michael346LBQ is offline   Reply With Quote
Old 01-15-2013, 12:30 AM   #4
bethandkevin
Montana Master
 
Join Date: Mar 2012
Location: Davison
Posts: 767
M.O.C. #12331
Although you don't state the model you're looking at, you ssould have all the truck you need to pull any Montana.
bethandkevin is offline   Reply With Quote
Old 01-15-2013, 04:59 AM   #5
DQDick
Montana Master
 
DQDick's Avatar
 
Join Date: Jun 2011
Location: Wilsey
Posts: 16,729
M.O.C. #11455
I would agree, many of us pull with 2500's.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, MorRyde pin box
2017 3500 Dodge Maxi DRW 4X4, Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, etc.
DQDick is offline   Reply With Quote
Old 01-15-2013, 10:26 AM   #6
1retired06
Montana Master
 
Join Date: Feb 2012
Location: Lake Gaston
Posts: 7,868
M.O.C. #12156
High Country is advertised as a lite weight. I would double check the pin weight, but would think you are fine with your truck.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
1retired06 is offline   Reply With Quote
Old 01-15-2013, 10:58 AM   #7
grayghost03
Montana Master
 
Join Date: Dec 2011
Location: Roswell
Posts: 627
M.O.C. #12028
Send a message via MSN to grayghost03
We pull the 343RL which is 37feet with a 2500 and it pulls like a dream, we only have about 5000 miles 40 nights on it. But no issues to speak of. The cable slides are great, no adjustments so far. Our dealer says the haven't had a cable problem yet. And to tell the truth I would rather deal with a replacement cable then a hydraulic hose. The mattress sucked, replaced with sleep number. So far so good.
grayghost03 is offline   Reply With Quote
Old 01-15-2013, 11:16 AM   #8
08UltraRider
Montana Fan
 
Join Date: Sep 2010
Location: Calgary
Posts: 162
M.O.C. #10763
We also have a 343RL pulled with a 2010 2500HD D/A.

The main slide I felt was out of adjustment when new where we had it adjusted by a mobile guy who knew what he was doing. No issues other than that adjustment.

Pin weight when I last weighed it loaded along with full fresh water tank was about 2000 pounds which for what I have in my truck put it about 100 pounds over the 9200 GVWR. Easiest solution to keep the weight cops happy was to lose 100 pounds which I did since the trailer was stored I went on a diet and am presently 20 pounds short of my goal of 100...

2000 pound pin wieght is well below the capacity of the rear axle and tires plus I added air bags which don't do anything for the capacity but it does transfer some (albiet not much) of the rear weight to the front when pumped up.
08UltraRider is offline   Reply With Quote
Old 01-15-2013, 02:03 PM   #9
subra1228
Montana Fan
 
Join Date: Sep 2010
Location: Portland
Posts: 291
M.O.C. #10766
We have been fulltiming in our High Country for 1.5 years now - pull with an F-250. We like it and (knock wood) have no trouble with the slide mechanisms. Everything still looks good - great hot water heater to - I was worried that it's only 10 gallons, but it heats up quickly.

Let me know if you have any specific questions.
subra1228 is offline   Reply With Quote
Old 01-15-2013, 02:53 PM   #10
Flymutt
Montana Fan
 
Join Date: Feb 2012
Location: Bella Vista
Posts: 472
M.O.C. #12223
If you think that you may be over your tow limits with your truck, I would suggest you get all the specifications on the 5er and your truck and do very careful computations. Because once you own it, if it becomes uncomfortable for you, you will either have to live with it or trade it. Neither of which are very good options. By the way, don't count on an RV salesperson for reliable advice on weight limits because most do not know that information (even though they might think they do).
Flymutt is offline   Reply With Quote
Old 01-15-2013, 04:15 PM   #11
McIver
Gone Traveling
 
Join Date: Sep 2012
Location: ALBUQUERQUE
Posts: 248
M.O.C. #12840
Before I bought my rig I checked with a number of owners pulling large rigs with the same truck I have. The most convincing was one from Canada that I met in Arizona who said that he hes been traveling to and from his home for a number of years with the same truck I have. The Canadian Rockies were not a hindrance and thus I was convinced. Tires suggested on this site and air bags to keep it level have been added for prudence. Four wheel drive would be something I would like to have but don't.
McIver is offline   Reply With Quote
Old 01-17-2013, 02:41 AM   #12
dwatk
New Member
 
Join Date: Dec 2012
Location: tiger
Posts: 3
M.O.C. #13054
have 2012 32re high country have had no problem with this unit slides work great
over all quality is very good. we pull this with a 2500 hd 4 w/drive gas 6 leter
with a 410 rear gear. no complants even in the Smokey Mtns.
dwatk is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
High Country VS Montana boomer116ars General Discussions about our Montanas 142 01-23-2019 07:23 PM
High Country vs Montana wannabervin Full Timing in your Montana 27 04-25-2017 05:47 PM
Montana High Country 310 RE or 352 RL WRG General Discussions about our Montanas 17 06-28-2016 11:40 AM
Do Not buy Montana High Country 343 RL jackson47 General Discussions about our Montanas 19 11-19-2011 05:58 PM
Montana High Country CasaDelSol General Discussions about our Montanas 6 10-04-2011 10:26 PM

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 12:53 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×