slideouts

[chips0213]

we have a 2011 mountaineer 347tht.it has a remote control to operate many functions on that unit including opening & closing slide outs.Interior by control panel also has a button for open & close of slide outs.Currently the interior button does nothing for the slide outs moving in or out. I have checked main fuses, fuses in the converter box and had the main battery tested, everything ok except no response from the interior button. Help now what do i check? Is there a relay for the wires that run from the slideouts interior button to where the sensor is for the remote control?

[Ishler]

On the remote module there are 2 wires labeled Manual Switches, check for 12VDC there. if not the remote module is bad. If yes than you have a broken wire between there and the switches. Am going through this now with our unit. LCI recommends replacing the module and the fob.

[Carl n Susan]

This problem comes up every six months or so. A "search" will identify a number of posts on solutions to the problem. The link below is the best answer to your problem.
http://www.montanaowners.com/forums/showthread.php?t=46515