No Fuss Flush

[Mr.oddjobs]

Can anyone share their experience of having to take the spray nozzle out of the tank? Rig is 2004 2955RL with an arctic insulation package.

[noneck]

Suspect a problem with the nozzle? My trailer is 3255RL w/Arctic package (foil like sheet on top of the bottom black plastic sheet, just unscrew and you can pull it down...then you need to trace the flush tubing to the point it connects to the nozzle...here's a pic of it on my black tank.
Removal is easy...
1) Make sure tank is drained...flushed really, really well
2) Pull three screws and pry loose from RTV

[Mr.oddjobs]

Thanks for the picture and information, great help.

[Trailer Trash 2]

Noneck did you change out the factory flush nozel, and put in a differant type in the tank, also is the picture sideways? and what type of sealer did you use? I will be going under mine to remove my nozel it got stones in it from a durty water system in So Dakota.

Another question to any readers on flushing systems what is a good type to install in the same hole or is the factory one ok to reuse.
Thanks

[noneck]

Ahhhh, so I added one that points sideways across towards the drain pipe. Its just Tee'd into the feed to the factory one that is at the high end of my tank. You can never flush too much...

I used RTV to seal it...so far no drips.