|
09-10-2008, 03:37 PM
|
#1
|
Established Member
Join Date: Aug 2008
Location: Inman
Posts: 11
M.O.C. #8717
|
Tire Chocking
I apologize if this has been addressed before. The tandem tire chocks that work like a scissor -jack. Are they as good as they say? Can they damage your tires? Do you have to buy a pair or does one side secure rig( 38') even on a hill?
Thanks
Marc Morgan
|
|
|
09-10-2008, 04:34 PM
|
#2
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
|
We use the deluxe tire locking chock by BAL from camping world. We have always used them on both sides. I guess our thought is if one side is good both sides will be better. We have been pleased with their performance. I guess if you got crazy on tightening them they could damage the tires or knock the axles out of alighnment. A little common sense should prevent any problems.
__________________
2006 3000RK
2009 Ram 2500
|
|
|
09-10-2008, 04:37 PM
|
#3
|
Montana Master
Join Date: Nov 2002
Location: Bakersfield
Posts: 5,316
M.O.C. #15
|
Marc,
This topic has been discussed many times. You might try doing a "search" to see what pops up.
I do not use that type of chock so I have no real world info to pass on to you.
However when you chock you should ALWAYS chock both sides of the trailer! If you chock only one side you stand the chance of the rig pivoting. Not something you want to happen. Chocking is the first thing we do when we set up the rig. And it is the last thing we remove when breaking down. I encourage you to chock anytime you remove the trailer from the tow vehicle.
Someone will come along to give some first hand info about the type of chocks you're inquiring about.
Good luck.
HamRad
|
|
|
09-10-2008, 11:33 PM
|
#4
|
Established Member
Join Date: Sep 2008
Location: Bella Vista
Posts: 39
M.O.C. #8786
|
Marc, We have been using those type of chocks on our SOB for years with no problems. Ours are the cast aluminum, leverage type. We always chock the tires first thing when we set up and remove them just after we reconnect to the trailer. Never any problems.
Good luck,
Montyman
|
|
|
09-11-2008, 02:52 AM
|
#5
|
Established Member
Join Date: Aug 2008
Location: Inman
Posts: 11
M.O.C. #8717
|
Thanks for the info and sorry about the repeat. I tried searching first, but nothing came up.
Marc
|
|
|
09-11-2008, 04:16 AM
|
#6
|
Montana Master
Join Date: Aug 2004
Location: Cedar Rapids
Posts: 4,876
M.O.C. #1944
|
When we first started full timing those were the chocks we used. After living through a couple years and experiencing rocking forward and aft, we tried the Roto-Choks. For us, they were a great improvement. Forward and aft rocking is minimal, almost unnoticeable.
Orv
|
|
|
09-11-2008, 07:48 AM
|
#7
|
Montana Master
Join Date: Jul 2003
Location: Clearwater
Posts: 10,917
M.O.C. #420
|
We also use the Deluxe Tire Locking Chock . Using them on both sides has totally removed all fore and aft movement.
|
|
|
09-11-2008, 09:29 AM
|
#8
|
Established Member
Join Date: Aug 2008
Location: Silver City
Posts: 25
M.O.C. #8711
|
I use the large plastic CHOCKS from CW. They work good and are considerably cheaper than the roto-Chocks.
YMMV
Gary
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disclaimer:
This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.
All times are GMT -6. The time now is 01:30 PM.