|
09-10-2016, 09:44 AM
|
#1
|
Established Member
Join Date: Sep 2015
Location: Barrie
Posts: 38
M.O.C. #17882
|
12v lighting in slide failure.
12v lighting in slide does not work? Lights over reclining chairs were fading when switched on then failed. The light over the dinette also does not work. Checked connections at lights. No blown fuses? Both light have different wire colours (one white/orange stripe the other black/white stripe) is there a junction box where these two wires share a common feed from fuse box? Any ideas where to look next.
|
|
|
09-10-2016, 10:06 AM
|
#2
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Under the slide either on the slide itself or on the main frame, there should be a electrical box with a cover on it ... the wires will be in a loom that extends out with the slide. Look there.
|
|
|
09-10-2016, 01:02 PM
|
#3
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,167
M.O.C. #6433
|
Did you check the fuses by pulling and looking at them, using a voltmeter to check for voltage, or look at the LEDs to see if one was on? Keep in mind that you would have to have the light switch turned on for the LED to illuminate for a blown fuse. There must be a completed circuit thru a load for the blown fuse indicator to illuminate.
But as noted above, check that junction box for good connections.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
09-11-2016, 04:10 AM
|
#4
|
Established Member
Join Date: Sep 2015
Location: Barrie
Posts: 38
M.O.C. #17882
|
Thanks for the feedback. Will check all mention items.
|
|
|
09-11-2016, 08:31 AM
|
#5
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Quote:
quote:Originally posted by dieselguy
Under the slide either on the slide itself or on the main frame, there should be a electrical box with a cover on it ... the wires will be in a loom that extends out with the slide. Look there.
|
X2 That would be my start point.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
09-12-2016, 09:03 AM
|
#6
|
Established Member
Join Date: Sep 2015
Location: Barrie
Posts: 38
M.O.C. #17882
|
Problem found on main frame behind the flashing. Wires just crimped with no protection. One wire corroded. Repaired and lights back on.
Thanks again for the hints on where to look.
|
|
|
09-12-2016, 10:38 AM
|
#7
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,167
M.O.C. #6433
|
Thanks for reporting the solution. So many times suggestions are made and the OP never returns to say whether he/she solved the problem or not. So we never know.
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disclaimer:
This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.
All times are GMT -6. The time now is 09:15 PM.