|
06-18-2005, 05:00 AM
|
#1
|
Montana Master
Join Date: Aug 2004
Location: La Pine
Posts: 2,654
M.O.C. #2018
|
Protecting walls around stove
Don't know if this has ever been discussed or not; and have not done this ourselves, but----------
Have friends who just purchased a new Montana and mentioned that they were going to put plexiglass on the walls around the stove to protect from spatters. They had done this in their previous 5th wheel - used mirror clips to hold the plexiglass in place. Makes sense to me, especially if you are full timing like they are. Just thought I would share someone else's good idea.
|
|
|
06-18-2005, 08:48 AM
|
#2
|
Montana Master
Join Date: Mar 2004
Location: Racine
Posts: 809
M.O.C. #1165
|
This is one of the first things we did to our Monty - really helps in cleaning up those cooking splaters you get, no matter how careful you are.
|
|
|
06-18-2005, 10:03 AM
|
#3
|
Montana Master
Join Date: Feb 2005
Location: Statham
Posts: 1,410
M.O.C. #3215
|
Very good and logical idea! Marsha and I rarely use the stove inside our campers—you could probably count on both hands the number of times we used the stove on our Prowler in the seven years we camped in it—but this would be a good adition in case we have to use the stove on rainy days.
Perhaps Keystone might even pick up this idea and start installing plexiglass on Montanas in the future. Makes perfect sense!
|
|
|
06-18-2005, 11:50 AM
|
#4
|
Montana Master
Join Date: Aug 2004
Location: Fallon
Posts: 6,064
M.O.C. #1989
|
We have a cutting board that stands up on the side and protects the side and the back is protected by the stove top that folds up and rests against the back. Easy clean up.
|
|
|
06-18-2005, 02:21 PM
|
#5
|
Montana Master
Join Date: Sep 2004
Location: sioux falls
Posts: 1,835
M.O.C. #2121
|
It is a good idea! We immediately put plexiglass on the left side of our stove and the lifted stove cover provides protection for the backside when cooking. We just drilled little holes and screwed it directly to the wall.
|
|
|
06-18-2005, 02:49 PM
|
#6
|
Montana Master
Join Date: May 2003
Location: New Bern
Posts: 4,294
M.O.C. #311
|
Sunshine,
We did not use the Plexiglas but did buy the stainless steel or polished aluminum piece and mount it on the right hand side of the stove. I was lucky enough to have a mental shear at work to cut it to the correct length.
Both work well but the steel will handle a little more heat.
Thanks for the comment
|
|
|
06-18-2005, 03:26 PM
|
#7
|
Montana Master
Join Date: Apr 2004
Location: Ontario
Posts: 722
M.O.C. #1328
|
We did the same in our rig. Much easier to clean the plexiglass than the wallpaper. I used a piece of plexiglass that was made to replace a windowpane. The local Lowes had several sizes available.
__________________
Mike & Donna Ishler Ontario, NY KE2LU FN13
2017 3720RL TST S637's
2017 Dodge 3500 Laramie CTD 4x4 Auto
|
|
|
06-18-2005, 04:01 PM
|
#8
|
Montana Master
Join Date: Feb 2004
Location: Wetumpka
Posts: 4,936
M.O.C. #1105
|
We put up plexiglass on the right side of the stove, using good ol' velcro. It has come down a few times so I need to replace the standard velcro with the industrial strength.
|
|
|
06-20-2005, 03:32 PM
|
#9
|
Montana Master
Join Date: Feb 2005
Location:
Posts: 1,502
M.O.C. #3142
|
Sounds like a good idea with the plexiglass, I was using my sink covers against the wall while cooking.
|
|
|
07-11-2005, 12:34 PM
|
#10
|
New Member
Join Date: Jun 2005
Location: Ogden
Posts: 3
M.O.C. #4024
|
What are mirror clips? Sounds like good idea. We are fooling with velcro and not working so well. John
Quote:
quote:Originally posted by Sunshine
Don't know if this has ever been discussed or not; and have not done this ourselves, but----------
Have friends who just purchased a new Montana and mentioned that they were going to put plexiglass on the walls around the stove to protect from spatters. They had done this in their previous 5th wheel - used mirror clips to hold the plexiglass in place. Makes sense to me, especially if you are full timing like they are. Just thought I would share someone else's good idea.
|
|
|
|
07-13-2005, 07:00 AM
|
#11
|
Montana Master
Join Date: Nov 2002
Location: Weatherford
Posts: 1,383
M.O.C. #9
|
In our previous TT, I simply drilled and countersunk 6 holes and used little brass screws. The "mirror clips" are those plastic clips with a screw through them that are used to hold the mirrors over the sink, etc. in place. You may have some holding the glass in your kitchen cabinet doors or the bathroom mirror from the backside.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|