Prodigy2

[yablonskil]

Just bought a Prodigy P2 to replace very old Brake Controller. I have a 2002 Ford F-350 7.3L Diesel truck and am pulling a 08 3400 RL Monty. Wondered what setting others are using on their Prodigy with similar set up. Truck weighs 9000#s & Monty around 14,000 packed & on the road.

[2 for Him]

Yablonshil,
You'll just have to set it up like the instructions say with trial and error. Mine changes seasonally, with the different loads, with different road surfaces ect. Seems like I can't keep from bumping the sensitivity control when vacuming and cleaning the truck too.
Be sure you have the setup in your head, you'll need it frequently.
Tom

[Art-n-Marge]

I agree with "2 for Him". This is very much a setting depending on many factors therefore one person's setting won't be the setting for another even with everything seeming to be the same. Then you will find you need to change settings as conditions change (weather, age, wear and tear, etc.)

If you need some help with the instructions, please don't be afraid to ask. This is something I check every time I hitch up and before I get underway for a long trip and like mentioned above, you'll need to check this every trip so learn the routine well.

[c214dick]

I have the Prodigy 2 also and there is a specific set up that's geared to your conditions. If you don't have the instructions, send me a PM and I will scan and email them to you.

[Hooker]

Yep, agree with the others...just read the instructions, they are very good.