Calling all toilet risers!

[sfretts]

I thought about getting a new, taller toilet for our Mountaineer. A friend had added a Thetford riser. He loves his set up. So when her went to CW last week I had him pick one up. I looked and saw that my toilet is a Sealand and on the box it says it will work with the 510 and 610 toilet. Of course I have the 210. Anyone have experience with this setup? I am curious before I try to get my petite body in there to remove the toilet only to find it wont work with my model. I cannot locate any additional info on the Thetford web site.

Thanks

Steve

[ols1932]

I've had the Thetford riser on our toilet since September '07 and it is wonderful for someone who has had knee replacements and back surgery. However, our toilet is a Thetford Aqua Magic IV.

Orv

[sfretts]

Update:

I got brave last friday and decided to take on the riser. I knew I was flirting with disaster as we were heading out for the weekend that afternoon. Should this cause a problem, I was in trouble.

I pulled the toilet with little trouble and located the spot to access the water line. I drilled the hole in the riser and the only issue was how to install the seals. A Sealand toilet seal is larger than the Thetford. I put the Small seal on the bottom of the riser and the original seal on top. Worked fine and after buying a flex hose at the local plumbing supply, hooked up the water and tested. Worked great. It took about 30 minutes to complete. Very easy and a very useful addition as far as I am concerned.