Slide outs

[merritt1982]

Please advise. Model 3820fk and our middle slides will not go in. Yes the hydraulics are all on and on Shore power. Someone suggested it possibly tripped the 50 amp? We are very new owners. All the other slides went in. These are the large ones in the middle in the living area. Is there a manual way to do this?

Thank you
Merritt1982

[prndl]

What year?

[1retired06]

Manual operation with an electric drill at the pump location is described in the Lippert owners manual you should have received with the unit. Directions for manual operation also available on line.

[prndl]

Originally Posted by 1retired06

Manual operation with an electric drill at the pump location is described in the Lippert owners manual you should have received with the unit. Directions for manual operation also available on line.

How will that help? The other slides are working. One pump for all slides.

[jjfleck]

I have a 2017 3820FK (probably the same lay out year to year). The two LR slides and the bed slide are hydraulic(middle button on panel). The kitchen slide is a electric shwintech set up (3rd button). And the BR cabinet slide is a cable slide set up (1st button). Does the bed slide work? Does the pump come on when pushing middle button? The breaker should be on the wire going directly to the hydraulic pump. You can check the breaker with a meter. Give us a little more info and we could probably get you headed in the right direction.

[jjfleck]

Just a note. Keep in mind with the hydraulic slides while pushing the button they pretty much move one at a time. In or out and not in any certain order. hope that helps.

[jeffba]

Have you looked at the hydraulic ram to see if it is leaking?