|
11-30-2012, 01:04 PM
|
#1
|
Montana Fan
Join Date: Dec 2009
Location: Halifax
Posts: 335
M.O.C. #9963
|
On Board compresser
Any one out there with an on board compressor and what brand and how does it perform? I shoud have been clearer as I was talking about one mounted on the tv. I carry a 3 gallon one now in the tool box. Thanks
joe
|
|
|
11-30-2012, 01:19 PM
|
#2
|
Montana Fan
Join Date: Oct 2006
Location: East Moriches
Posts: 418
M.O.C. #6436
|
I have this one in the RV and it works great. Would never be without it. I just replaced all 5 tires on the RV and needed to adjust the air. No need to find a gas station. Very handy.
http://www.homedepot.com/h_d1/N-5yc1...&storeId=10051
Note: I removed the regulator and put it on a quick connect. When I inflate the tires I plug into the tank unregulated and when I winterize the RV I plug in the regulator and blow out the lines with regulated pressure.
|
|
|
11-30-2012, 03:58 PM
|
#3
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
That's what many of us have, but most of us haven't installed it permanently. Much more convenient to be able to take it out of the basement and use it for other things. If you mean installing one in your truck, I believe Ozz and some others have done that.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
11-30-2012, 06:51 PM
|
#4
|
Montana Master
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
|
I have the 135 psi version of that Porter Cable and keep it in the truck, from there with the long hose that it came with, it can reach my Monty, my truck tires or any other thing I happen to be towing. I also keep two Honda gennys, either of which to power up the compressor, or tie both together to use for the Monty as a 30 amp source.
I think you do need to use at least a 6 gallon or more capable compressor for optimum performance unless you don't mind the time spent with a lesser one. I can say I used smaller in the past and now I'm glad I at least have this one.
I don't have a need to winterize but using it to blow out the water lines is also another great use. You just need the water hose adapter to connect the compressor to the rig to blow out the lines. There's more details for doing this but just ask if you need to know how and someone will be right along to explain the details.
|
|
|
12-01-2012, 02:39 AM
|
#5
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
If you mean 'On board' as in the TV, I have the 12 Volt Viair constant duty compressor piped to an air chuck on top of the running boards, and a 2.5 gallon air tank mounted under the truck. Also a 1500# CO2 air tank mounted in the truck bed.
|
|
|
12-01-2012, 02:56 AM
|
#6
|
Montana Fan
Join Date: Dec 2009
Location: Halifax
Posts: 335
M.O.C. #9963
|
Thanks Ozz, that is what I need,
Joe
|
|
|
12-01-2012, 03:58 AM
|
#7
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
Quote:
quote:Originally posted by brooksider
Thanks Ozz, that is what I need,
Joe
|
Joe, here's the 411 on the air tank. A 12 volt compressor is best coupled with an air tank, you get the first volume of air for the fill, then the compressor can refill the tank while you are driving down the road.
You must have a good pressure cut-off switch to cycle the compressor, both for the compressor warranty and also to cycle the compressor to lengthen it's life.
I wired in a relay so the compressor is energized only when the key is on: engine is running, as it pulls a lot of Amps, best to have the truck running then. Then put in the appropriate fuses: 30 amps for the 12 volt compressor. I have a switch to kill power to the compressor power, a good idea. The switch cuts the 12 volt coil power, so I could run low voltage (light gage) wire to the cab.
If you have any questions, please let me know and I will help if I can.
Ozz
|
|
|
12-01-2012, 01:58 PM
|
#8
|
Montana Fan
Join Date: Dec 2009
Location: Halifax
Posts: 335
M.O.C. #9963
|
Thanks again Ozz. I am looking at apurchase and a install when I get my truck back from the shop.
Joe
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Also new to the board
|
SHILO1977 |
New Member Introductions |
8 |
03-06-2016 05:56 AM |
New to the Board!
|
tabraha |
New Member Introductions |
19 |
02-23-2016 10:45 AM |
Using Peg Board...
|
Glenn and Lorraine |
Additions & Improvements |
8 |
06-28-2007 06:08 AM |
Dinosaur Board
|
Ed Benson |
Additions & Improvements |
11 |
08-04-2005 07:03 AM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|