|
12-13-2012, 03:54 PM
|
#1
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
Even better than Sliced Bread
Did a little personal gift giving and bought a Max Brake controller for my truck. I've loyally owned a Prodigy for years with good brake control, but I have to tell ya, the Max Brake is waaaaaay better. It's really close to making those of us with older trucks have comparable braking performance provided by the integrated systems on the new ones. It's easy to install and a breeze to calibrate. You don't even need to have a trailer hooked to your truck to do this as it is brake pressure controlled. The more you step on the brake pedal, the more pressure you create, the more voltage this unit sends back to your RV or trailer. The photo shows a tee you have to install in series with either brake line on your brake master cylinder and a short steel line with the transducer on the end ... thats it. It even comes with a direct connect plug for the factory wiring depending on your vehicle. I've tried it out in a parking lot and on the road with no change in gain, the Montana has instant braking with no low speed tire skidding on loose stuff. No I'm not getting an advertising fee, I'm just amazed! It's a tad pricey at $350, but no more than the sales tax you'll pay should you buy a level-up system.
|
|
|
12-14-2012, 07:01 AM
|
#2
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Great info, thanks! Glad you like it.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
12-14-2012, 07:20 AM
|
#3
|
Montana Master
Join Date: Feb 2005
Location: Sioux Falls
Posts: 729
M.O.C. #3206
|
Had a similar control back in the day before ABS, etc.- As I recall, it was not recommended on brake systems with ABS- Do you know this has changed? I would certainly look into this system if you can supply current data- Many THANX for posting!!! JMHO- Don
|
|
|
12-14-2012, 07:47 AM
|
#4
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
5 year warranty, compatable with ABS, compatable with hydraulic disc brakes. http://www.maxbrake.com/brake-controller.php
|
|
|
12-14-2012, 01:43 PM
|
#5
|
Montana Fan
Join Date: Jul 2006
Location: No. Attleboro
Posts: 338
M.O.C. #6002
|
Looks like a nice product. Thanks for the info.
|
|
|
12-15-2012, 02:00 AM
|
#6
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
SWEET!
|
|
|
12-15-2012, 05:45 AM
|
#7
|
Montana Master
Join Date: Aug 2006
Location: merced
Posts: 983
M.O.C. #6171
|
Looks cool, give us an update after a few good trips.
|
|
|
12-16-2012, 04:19 AM
|
#8
|
Montana Master
Join Date: Jun 2010
Location: Colorado Springs
Posts: 3,335
M.O.C. #10496
|
A good recommendation! Please do a follow-up post with your experiences with this unit.
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|
|
|
12-18-2012, 09:58 AM
|
#9
|
Montana Master
Join Date: May 2007
Location: Montgomery
Posts: 502
M.O.C. #7196
|
Concur the MAXBRAKE is sweet! Truck and trailer feel as "one" now with GREAT braking, albeit one downside is I've taken some more risky slowdowns to test it.
However, installation is not always as easy as they say as I could not get the stock Brake Line to go back into the provided T fitting well/easy enough on my own. I used the proper brake line wrenches, pipe bender, but ended up having to have my local garage experienced mechanics redo it which included a new T fitting and stock brake line... My attempt was a little off and leaked. Also, I painted the inside display unit Black to match my interior.
Recommend "Plug-it-Right.com" as vendors - provided great service as I dealt with my personal problem.
|
|
|
12-19-2012, 02:43 AM
|
#10
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
RRman ... I guess each would have his own experience with installation. Since the tee is less than an inch long, I didn't have to bend anything on my stock brake line ... it screwed right back on. A rule of thumb from the mechanical trade ... "if it won't screw back on by hand, don't grab a wrench and try to persuade it". As for shaping the 6" line included in the install kit ... I just eased the bend by hand so the transducer wouldn't be sticking up in the air. I added a bit of foam and a wire tied the line to the existing brake line to add a little support as seen in the photo. Glad you like the controller!
|
|
|
12-21-2012, 03:45 AM
|
#11
|
Montana Master
Join Date: Nov 2005
Location: cedar rapids
Posts: 703
M.O.C. #4962
|
Ihave a Brake-Smart for quite some time and would not be with out it. I don't even know if they are still avaible?
|
|
|
12-21-2012, 01:19 PM
|
#12
|
Montana Master
Join Date: Jul 2007
Location: Galena
Posts: 989
M.O.C. #7380
|
We put the same Max Brake on last summer and love it. Would buy it again in heart beat. Not another breaking system we had could even come close to it. Expensive but worth it.
|
|
|
12-22-2012, 04:23 AM
|
#13
|
Montana Fan
Join Date: Sep 2009
Location: Claypool
Posts: 279
M.O.C. #9711
|
I installed one on my new truck after reading about all the disappointment with the factory controller and was amazed about how well it works. Would do it again in a heart beat.
Don
__________________
SOB Curt 25 K 5th wheel hitch
2012 Ram 3500 DRW Laramie Long Horn
RDS 60 gallon fuel tank, air lift air bags
Wheel to wheel SS side bars
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Moldy Bread
|
Exnavydiver |
Sitting around the Campfire |
3 |
04-14-2009 06:21 AM |
SAUSAGE BREAD
|
prariepoodle |
What's cooking? |
0 |
03-07-2008 05:51 AM |
Banana Nut Bread
|
Montana_354 |
What's cooking? |
0 |
03-20-2004 10:55 AM |
Beer Bread
|
prariepoodle |
What's cooking? |
0 |
10-09-2003 06:11 AM |
Apple Bread
|
prariepoodle |
What's cooking? |
0 |
09-03-2003 06:57 AM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|