Eyebrow lights

[christm]

We have 3910 Montana Legacy. I noticed the other night that the eyebrow lights on the door side is not working but the other one is. Does anyone have a clue as to how to get to it to fix it?

[1retired06]

Never turned them on.

[cpaulsen]

One end has the wires that go thru a hole under the silicone....there is about a foot slack. I replaced mine which were amber with blue strips bought from amazon, A 2 pack about 18" long were about 10 bucks........cut them to the size you need and wire them up.

[christm]

I will give that a try, thanks.

[Last2Die]

what are the purpose for those lights anyways, they are on my 3920

[rohrmann]

They are placed there to drive owners crazy trying to get them to work. A neighbor at the park we are in now has a new SOB with them, and they weren't working. He was told the front cap would have to come off to make the repair. I checked for power coming out of the control panel and the switch was working. He removed a cabinet behind the center of the cap and found the wires going to those lights. Turns out, the manufacturer used those 3M Scotchlok connectors but they were not squeezed tight enough to cut through the insulation. The neighbor just cut them out and used wire nuts and now his lights work.

[Kyle and Lisa]

We always turn ours on with the awning and porch lights, but when we go to bed we only leave the porch light on in hopes that our neighbors will notice we have gone to bed and keep the noise down.

[cpaulsen]

Always use ours also......I figure....we got them...use them.