Self Leveling Jacks

[Dreamersandtravelers]

Recently, we have issue with level after we set up our 2013 3150RL with front creeping in or retracting all night. Thought it to be using retract as we hit level so I began ensuring it completed only extending to level with all jacks. Only using manual mode. No leaks observed, plenty of fluid, even unplugged relay wires. Any suggestions?

[laverdur]

I'm assuming the system you have is the Lippert Level-Up system. Was it original equipment or an after-market installation? If after-market and installed within the last 12 months, I'd take it back to whoever did the work and have them check for slight seepage on any of the jack hoses. I wouldn't think unplugging the wires will have any effect unless you hear the hydraulic pump running.

[Dreamersandtravelers]

Yes do not expect wiring has anything to do with creeping or settling as we sit level. Suspect a 'directional' valve. Right now have placed a block of wood which stopped creeping on specific extended jack. Have no 'proprietary' schematic of system from Keystone or Lippert as once requested (2014) when rear "cheena" tire bomb exploded on i26/i95. Managed repair with help from local john deere/caterpillar dealer by replacing hydraulic line.
Not counting on KS, Lpt or CW to assist with any issue.