|
04-19-2019, 10:20 AM
|
#1
|
Montana Fan
Join Date: Mar 2019
Location: Chino Valley
Posts: 226
M.O.C. #23720
|
Splitting the Tailgater Sat. signal
If your using a tailgater, has anybody figured out a way to split the signal for 2 separate receivers????? I'd like to split it going into the convenience center and feed LR and BR from one dish. I know most splitters won't allow the dish and receiver to talk.. What are ya'll doing for this issue???
__________________
Steven & Denise
New to us 2014 3150RL
Chino Valley, AZ
|
|
|
04-19-2019, 11:26 AM
|
#2
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,931
M.O.C. #20477
|
Steven and Denise,
I ran a dedicated line without any splitters. You also need a receiver for each TV. A tailgater will handle 2 as long as the channels you want to see are on the same sat.
If you want more flexibility you can always use one of the home antenna systems.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
04-19-2019, 11:50 AM
|
#3
|
Montana Fan
Join Date: Mar 2019
Location: Chino Valley
Posts: 226
M.O.C. #23720
|
How did you feed both receivers, without splitting it somewhere??? My tailgater only has room for one coax.
__________________
Steven & Denise
New to us 2014 3150RL
Chino Valley, AZ
|
|
|
04-19-2019, 11:57 AM
|
#4
|
Site Team
Join Date: Sep 2017
Location: Oro Valley
Posts: 3,931
M.O.C. #20477
|
You must have an early model, the newer ones have two coax connections.
__________________
Zack and Donna plus Millie and Ranger
2018 3160RL
"Life is too short to stay indoors, enjoy the ride!"
|
|
|
04-19-2019, 12:10 PM
|
#5
|
Montana Fan
Join Date: Mar 2019
Location: Chino Valley
Posts: 226
M.O.C. #23720
|
Probably, bought the tailgater and a vip211z receiver for $100. Works great. I'll check with dish to see if they know a way to split it!! Thanx for the info!!!!
__________________
Steven & Denise
New to us 2014 3150RL
Chino Valley, AZ
|
|
|
04-19-2019, 08:59 PM
|
#6
|
Montana Master
Join Date: Jun 2018
Location: Folsom, California
Posts: 552
M.O.C. #21903
|
You can't split the signal from dish to receiver. If your dish has 2 outputs, it most likely supports 2 receivers, each with its own RG6 cable from dish to receiver. You can then watch different channels, but only from one satellite at a time.
You can split the output of the receiver and feed multiple TV's, but they all will have the same channel.
__________________
'05 F250 6.0 Bullet Proofed - Sold
'17 F350 6.7 Lariet
'02 Montana 3280RL Upgraded a bunch.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|